You have searched for products starting with "S"

Simple Circuit Module Motor is a base-mounted circuit component fitted with a small motor, used to build basic series and parallel circuit demonstrations in school science. It demonstrates current flow with a working motor load.
Note:
View Details
On base, an on/off push button switch.
Note:
View Details
Simple Circuit Module Lamp Holder is a base-mounted lamp holder used as a plug-in component in modular circuit-building kits. It connects into a circuit board to demonstrate current flow and lamp behaviour.
Note:
View Details
Edulab China Manual or timed counting of 1,10 or 100 seconds.
Note:
View Details
The earth provided is connected to the physical earth through the power cord; the signal generator output
Note:
View Details
The Edulab China Speed of Sound Kit comes with two condenser microphones
Note:
View Details.jpg)
PULSE, TTL/CMOS Sine/Square/Triangular all the three outputs are available
Note:
View Details
A spring balance reading 100N x 5N is fitted to one end and the tension exerted and measured
Note:
View Details
At one end of the base are two 50N spring balances with hooks and at the other end
Note:
View Details
The steel shaft carries a clock spring with a free wheel device, winding ratchet and aa 56mm diameter aluminium 'V' pulley.
Note:
View DetailsWith side tube and water gauge. Steam generator constructed from copper.
Note:
View Details
Edulab China consists of a sealed syringe mounted on wooden platforms.
Note:
View Details
Student Digital Joulemeter is designed specifically for student use.
Note:
View Details
Housed in a black powder-coated metal case with 100mm dial.
Note:
View Details
The laser beam can be modulated by applying an external digital or analogue waveform
Note:
View Details
A black panel behind the tube eliminates distracting ambient light and protects the tube from breakage.
Note:
View Details
The main structural parts, including the collimator and telescope bodies are high quality castings.
Note:
View Details
The lamp is mounted inside a black protective tube standing up from the top of the power unit.
Note:
View Details
Edulab China Sodium spectral lamp for spectral lamp power supply.
Note:
View Details
Muscle and ligament tissue is colour differentiated. The skeleton is life size and is mounted on a base stand.
Note:
View Details
Edulab China Life Size plastic skeleton has a detachable skull with a full set of permanent teeth
Note:
View Details
Edulab China Topics include learning how a lens affects vision, measuring field of vision and capturing sound waves.
Note:
View Details
Edulab China Basic medical stethoscope and single diaphragm head.
Note:
View Details
A container for soda lime crystals is fitted which can be used to absorb carbon dioxide.
Note:
View Details
Edulab China Based upon their diagnosis and the patient's medical history, they will be challenged to construct
Note:
View Details
One tube of complete medium. One tube lacking one of each mineral
Note:
View Details
The sucrose molecular model kits are self-assembly.
Note:
View Details
Single pan balance, cap. 311gm x 10mg with 4 beams each provided with a non-removable slider and graduated 0 to 200 x 100g
Note:
View Details
Cast Masses Large format slotted mass.
Note:
View Details
Cast Masses 500g Hanger only.
Note:
View Details
Operating ranges: Absorbance, 0-1 linear and 0-2.
Note:
View Details
Spare Colour Filter Wheel for the S-Range Digital Colorimeter.
Note:
View Details
Bath has a stainless steel dome cover, perforated and removable shelves, drain
Note:
View Details
Edulab China Polycarbonate safety goggles with adjustable strap.
Note:
View Details
Edulab China Powder coated aluminium and four breaked castors.
Note:
View Details
Edulab China, An aluminium block with an angled hole drilled to accept a thermometer (not included).
Note:
View Details
This product is recommended for counting and sorting activities.
Note:
View Details
The teachers will find it a useful training aid. Size of the manipulatives makes it possible for teaching in a group.
Note:
View Details
Safety Scissors School type, blunt/blunt blades of stainless steel with rounded tips and a rivet of stainless steel
Note:
View Details
Edulab China Slate pencil, white lead, approximately 3mm white core, quality wood casing, without eraser, sharpened
Note:
View Details
This Squibb-style separatory funnel is a pear-shaped glass funnel fitted with a stopcock, used to separate two immiscible liquids of different densities in liquid-liquid extraction procedures.
Note:
View Details
This 250 ml separatory funnel is used in a variety of inorganic and organic chemistry processes.
Note:
View Details
This simple microscope has just two moving parts and needs no electricity.
Note:
View DetailsNosepiece: Triple, rotating in both directions with objective click locking system
Note:
View DetailsObjectives: Fixed magnification; 1x, 2x and 4x objectives. Easily rotatable objective
Note:
View DetailsObjective Lens: Brass Construction Paired Objectives: 1x, 2x, 3x
Note:
View Details
The slump cone has internal dimension 200 mm dia at base 100 mm top dia and 300 mm height foot
Note:
View Details
Conduction slump cone and air meter tests. Flat bar made from steel.
Note:
View Details
A metal tamping rod Edulab China weighting 12 ounces and having a flat circular tamping faces 1 inch in dia meter.
Note:
View Details
An experimental apparatus to investigate a simple suspension bridge structure, and measure the cable tension under various loads.
Note:
View Details
Students apply loads at set positions using hangers holding various masses.
Note:
View Details
Their sturdy designs, flawless finish and hassle free operations make these machines a preferred choice
Note:
View Details
This Machine is Automatic Mounting Press for metallographic specimen.
Note:
View Details
Slake durability is a simulated weathering test to determine abrasion resistance during wetting
Note:
View Details
All items are housed in the plastic carrying case except the Siphon assembly with Stock solution
Note:
View Details
Apparatus consists of 0.0125″ (1.6mm) dia. brass rod with rounded point inserted into plunger.
Note:
View Details
Tool set with case, for machine assembly Rule for sliding length verification
Note:
View Details
It handles any material from Sand sizes up to dia. 108 mm.
Note:
View Details
Measurement range is 200 mm and graduated with 0.05 mm increments.
Note:
View Details
The viscometer can be used for temperatures between 21 and 99 °C (70 to 210 °F).
Note:
View Details
The viscometers, Edulab China available in two versions: single and two tubes, include bath
Note:
View Details
The viscometer Edulab China consists of a chrome plated copper bath
Note:
View Details
This lightweight apparatus Edulab China is made up of mild steel or aluminum as per customers
Note:
View Details
A rack and pinion and pointer assemble Edulab China provides fine adjustment of needle
Note:
View Details
To each other with their mouth towards center of the tray.
Note:
View Details
An electric heater in the left-hand chamber distils the solvent, which then passes through a water cooling
Note:
View Details
A circular hole is dug into the ground, all the soil from within it collected
Note:
View Details
The moisture content at a given depth of penetration of the cone is taken as the liquid limit.
Note:
View Details
The sample is obtained by percussion, lifting all the upper assembly which slides inside the jarring link
Note:
View Details
Sand Augers are designed for sampling looser, granular soils and have closed bits to retain cuttings.
Note:
View Details
The soil classification system that has been developed around Color System is an established
Note:
View Details
The apparatus can be used to determine shrinkage limit and to calculate other shrinkage
Note:
View Details
It consists of a special 2¼” diameter 200-mesh sieve, fastened inside a collar
Note:
View Details
Framework of MS tubes mounted on two 10 cms castors and two legs with PVC shoes.
Note:
View Details
It is also available in stainless steel finish. It has pre-treated powder coated finish.
Note:
View DetailsDesigned in a style to maximize patients comfort and independence.
Note:
View Details
This multi purpose table is designed to provide perfect solution for various type
Note:
View Details
It comes in finish of epoxy powder coated or complete stainless steel finish.
Note:
View Details
Safety Pin Medium Size for securing wraps and bandages.
Note:
View Details
Provision of three eye holes for efficient aspiration, soft tapered
Note:
View Details
Winged infusion set, ultra-thin wall Edulab China with sharp bevel needle
Note:
View Details
Edulab China designed for tracheal/bronchial suction, smooth implantation tested
Note:
View Details
Edulab China China Protection of floor against contamination from foot wear.
Note:
View Details
Protection of floor against contamination from foot wear.
Note:
View Details
Reliable and clear acoustics Edulab China offer an advantage to health care professionals
Note:
View Details
This machine is equipped with cooling system that can cool down the specimen during pre-grinding
Note:
View Details
Edulab China offered products has a unique wedge design helps specimen clamping
Note:
View DetailsA Scarab Robot Trainer is a type of pick and place robot trainer that is designed to teach students and engineers about the operation and programming of selective compliant articulated robot arms (SCARAs)
Note:
View DetailsUpper electrode is actuated by foot lever or by air cylinder.
Note:
View DetailsSAW is a type of arc welding that uses a continuous solid wire electrode that is fed into the weld pool through a tube filled with a granulated flux material
Note:
View DetailsA speed measurement trainer is a device that is used to demonstrate and teach students about the principles and operation of speed measurement systems
Note:
View DetailsA strain gauge transducer is a device that converts mechanical strain into an electrical signal.
Note:
View DetailsA sound meter is a device that measures the sound pressure level (SPL) of a sound.
Note:
View DetailsSnap gauges, also known as go/no-go gauges, are used to inspect the external diameter of cylindrical objects
Note:
View DetailsA spirit level, also known as a bubble level, is a tool used to measure the horizontal or vertical alignment of a surface.
Note:
View DetailsA spring caliper external, also known as an outside caliper, is a precision measuring tool used to measure the outside diameter of objects
Note:
View DetailsA surface plate is a solid, flat plate used as the main horizontal reference plane for precision inspection, marking out (layout), and tooling setup
Note:
View DetailsA sine bar is a precision measuring tool used to measure angles to a high degree of accuracy.
Note:
View DetailsSurface roughness testers are instruments used to measure the texture of a surface.
Note:
View DetailsA slotted weight, also known as a slot mass, is a type of weight used in precision weighing instruments.
Note:
View DetailsA slotted link mechanism apparatus is a device used to demonstrate and study the slotted link mechanism, which is a type of reciprocating motion mechanism.
Note:
View DetailsA section vehicle chassis trainer is a training device that allows students to learn about the different components of a vehicle chassis and how they work together.
Note:
View DetailsA steam engine model is a miniature replica of a steam engine.
Note:
View DetailsA servo hydraulic dynamic/static actuator is a device that uses hydraulic fluid to apply dynamic or static forces to a load.
Note:
View DetailsA subsonic air nozzle test setup is a piece of equipment used to test the performance of subsonic air nozzles.
Note:
View DetailsThe Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures
Note:
View DetailsThe Submersible Pump Test Rig is a hands-on testing setup for submersible pumps, featuring a closed water circuit and a powerful, standard centrifugal pump, suited to turbomachinery laboratory instruction.
Note:
View Details

