Home » Our Product » Mechanical Engineering » Material Testing Lab Equipment » Single Disc Polishing Machine

Single Disc Polishing Machine Manufacturer,Supplier and Exporter in China

Product Code : EL-MTLE-11464

Edu Lab China is a leading Single Disc Polishing Machine Manufacturer,and suppliers in China, Single Disc Polishing Machine Manufacturer,and suppliers in China, Single Disc Polishing Machine Algeria (Algiers), Single Disc Polishing Machine Angola (Luanda), Single Disc Polishing Machine Argentina (Buenos Aires), Single Disc Polishing Machine Armenia (Yerevan), Single Disc Polishing Machine Australia (Canberra), Single Disc Polishing Machine Austria (Vienna), Bahrain (Manama), Bangladesh (Dhaka), Bhutan (Thimphu), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Montenegro (Podgorica), Morocco (Rabat), Mozambique (Maputo), Myanmar (Naypyidaw), Namibia (Windhoek), Nepal (Kathmandu), New Zealand (Wellington), Nigeria (Abuja), Oman (Muscat), Palestine (Ramallah), Panama (Panama City), Papua New Guinea (Port Moresby), Paraguay (Asunción), Peru (Lima), Philippines (Manila)¸ Portugal (Lisbon), Qatar (Doha), Rwanda (Kigali), Saudi Arabia (Riyadh), Senegal (Dakar), Serbia (Belgrade), Sierra Leone (Freetown), Slovakia (Bratislava), South Africa (Cape Town) (Pretoria) (Bloemfontein), South Sudan (Juba), Spain (Madrid), Sri Lanka (Sri Jayawardenepura Kotte) (Colombo), Sudan (Khartoum), Syria (Damascus), Tanzania (Dodoma), Thailand (Bangkok), Togo (Lomé), Tonga (Nuku'alofa), Trinidad and Tobago (Port of Spain), Tunisia (Tunis), Turkey (Ankara), Turkmenistan (Ashgabat), Uganda (Kampala), United Arab Emirates (Abu Dhabi), United Kingdom (London), United States (Washington, D.C.).

This machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damaging the metallographic structure.

After mounting, the specimen is wet ground to reveal the surface of the metal.

The specimen is successively ground with finer and finer abrasive media. Silicon carbide abrasive paper was the first method of grinding and is still used today.

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures.

Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.

Polishing is the final stage in producing a surface edu scope that is flat, smooth, scratch- free and mirror like in appearance.

Many Metallography’s, however, prefer to use a diamond grit suspension, which is dosed onto a reusable fabric pad throughout the polishing process.

Diamond grit in suspension might start at 9 micrometers and finish at one micrometer.

Generally, polishing with diamond suspension gives finer results than using silicon carbide papers, especially with revealing porosity, which silicon carbide paper sometimes “smear” over.

After grinding the specimen, polishing is performed. Typically, a specimen is polished with a slurry of alumina, silica, or diamond on a nap less cloth to produce a scratch-free mirror finish, free from smear, drag, or pullouts and with minimal deformation remaining from the preparation process.

Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative.

In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism.

Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

SPECIFICATIONS:

Model	EDS01 (Brand: Edulab China)
Grinding/polishing disc diameter	Dia 203mm
Rotation speed	150rpm and 300rpm
Input voltage	AC380V/50Hz/3Ph
Grinding/Polishing disc quantity	1
Grinding/Polishing disc control	Single
Input power	370W

Single Disc Polishing Machine Manufacturer,Supplier and Exporter in China

Office Address

Quick Links

Follow Us